Product Description

DESCRIPTION: eile EPX **0 is a solvent free, thixotropic, structural two part adhesive and repair mortar based on high resistant fillers and epoxy resins. The paste form of eile EPX provides easy and practical usage at different conditions. It is used for fixation of injection packers, anchoring in concrete, rod anchoring and adhesion different materials to each other. FIELD OF USAGE ¥ Anchoring in concrete and stone walls ¥ Sticking and mounting metal or steel parts to concrete and steel elements. Using as a structural glue. ¥ Repair of concrete, usage for splits and as a filler ¥ Fixation of the fences of bridges and viaducts. ¥ Anchoring of cap screws and pins ¥ Sticking elastic dilatation stripes (eile FC **5 system) CHARACTERISTICS ¥ Easy to apply ¥ Provides early and high resistance ¥ Hardens without relay ¥ The mixed compound does not flow and it is in paste form. Suitable for top to bottom usage. ¥ Its capacity is high for filler lifting. ¥ Provides great adherence to concrete and steel. ¥ Resistant against to many chemicals. APPLICATION: Preparing The Surface: The surfaces must be clean and free from dust, oil, water and construction residues. For anchoring usages, the anchoring holes must be dry and free from dust, oil and water. The steel surfaces must be cleaned by sand. ATTENTION: When over temperature is applied although we do not advise, the usage period will decrease. At the same time , while working under low temperature the usage of the material will be difficult and the hardening time will be longer.Use protective gloves and eyeglasses during work. In case of contact with the skin, wash with immense water. In case of contact with the eyes, immediately consult to a medical doctor. PACKING: Sold as 5 kg set (A+B). A module is in 3, *5 kg box and B module is at 1, *5 kg box.